[MRC] PSD Detector > BEAM CONTROL UNIT

PRODUCTS
PRODUCTS BEAM CONTROL UNIT

BEAM CONTROL UNIT

BEAM STABILIZER [MRC] PSD Detector

페이지 정보

profile_image
작성자 관리자
댓글 0건 조회 46회 작성일 25-03-14 13:37

본문

Manufacturer MRC Systems GmbH
Country of Origin Germany
Model PSD Detector
Features See below

제품설명

라이트런에서 MRC PSD Detector 제품을 공급하고 있습니다.
제품에 대한 자세한 설명 및 사양은 아래 내용을 참고하시거나라이트런으로 문의 바랍니다.
MRC PSD Detector is supplied by Lightrun. For detailed product descriptions and specifications, please refer to the information below or contact Lightun for further inquiries.


Product description
The PSD detector uses a "position sensitive device" with a resistive sensor surface for detection. This sensor has no segmentation and provides continuous position information. In contrast to 4-quadrant detectors, the PSD detector thus enables position measurement over the entire detection area.
 
With the Adjust-In option of the Compact beam stabilization, laser beams can be stabilized at any point on the detection surface. With this feature the PSD detector complements the most commonly used 4QD detector with higher resolution.

By using Invar, a material with a small coefficient of thermal expansion, the high resolution of the detector is permanently maintained.
For easy adjustment of the laser to the sensor, the PSD detector has position and intensity indicators on the back.
 
A clean room version is also available.


PSD 
- Fast position measurement 
- Target position for stabilization can be freely selected 
- Submicrometer resolution


Applications for beam stabilization
1. When using the Compact beam stabilization, the PSD detectors can be positioned before the laser is finally adjusted. 
Once the laser has been adjusted, the target positions can be read out and the beam can be stabilized to these positions using the Set&Hold function.
 
2. The laser beam can be moved to different points with high precision by changing the target position on the detector. 
In doing so, the laser beam follows the external target but remains stabilized at the highest resolution.


Wavelength range
320 – 1100 nm

Detection area
9 x 9 mm2

Resolution / Accuracy
 < 0.5 µm / grating structure leads to repeatability of 1.5 µm when addressing a target point

Linearity over sensor area
 ±3%

Bandwidth
up to 100 kHz, limited to 30 kHz by default

Sensitivity (power/pulse energy)
 26 – 1560 µW / 26 – 1560 nJ @ 532 nm, cw / 1 kHz 

Optical filter in compartment in front of sensor / dimension Position / intensity display on housing
2 pieces, exchangeable / 11.9 x 11.9 mm2 LED cross with 9 LEDs / LED line with 10 LEDs

Minimum beam diameter
> 200 µm (for pulsed lasers)

Signal scaling of position output
 1.20 (± 0.04) mV/µm

Electrical power consumption
max. 1.2 W (12 V, 110 mA)